Tudor makes the winder question comparatively easy and at the same time a little harder. Easy, because the in-house calibres all work with a bidirectional rotor and so can use any direction of rotation the device offers. Harder, because a Black Bay on a steel bracelet carries considerable mass, so the holder has to do more than with a light three-hand watch. We have classified six devices on exactly these two points and noted which turns per day are documented for the individual Tudor movements and which are not.
The recommendations at a glance
| Model | Slots/type | Key feature | Price range | Rating |
|---|---|---|---|---|
| Barrington Single Watch Winder | 1 slot | 650 setting matches the MT5612 exactly | Mid-range | 4,2/5 |
| WOLF Heritage Single | 1 position plus storage compartment | Lock-in Cuff up to 52 mm, 3 directions | Premium class | 4,0/5 |
| Beco Technic Boxy Carbon Single 1 | 1 position, modular | Belt drive, 3 programmes, 3 directions | Mid-range | 4,4/5 |
| MODALO Ambiente MV4 for 1 watch | 1 slot | Solid Makassar wood, stop at 12 o'clock | upper mid-range | 4,2/5 |
| ROTHWELL double watch winder | 2 slots | 5 settings and 3 directions per slot | Mid-range | 4,2/5 |
| SONGMICS watch winder for 1 watch | 1 slot | 4 modes, LED, lock, USB-C | Entry level | 4,0/5 |
The Beco Technic Boxy earns the highest overall rating in the field, because drive, build quality and expandability fit together best in it. For Tudor, however, we still put the Barrington Single in first place, because it offers 650 turns per day as a dedicated setting and so hits the only database value documented for Tudor precisely. The WOLF Heritage follows directly behind once your case gets heavy and the holder becomes the main issue.
The devices in detail
Barrington Single Watch Winder
- Five clearly documented speed settings at 650, 750, 850, 1,000 and 1,950 turns per day, plus clockwise, anticlockwise and alternating rotation instead of vague mode descriptions
- The 650 setting in alternating mode corresponds exactly to the value the winder databases list for the Pelagos calibre MT5612; a Tudor can hardly be served more finely
- Runs on the supplied power adapter or on two AA batteries; according to the manufacturer, one set lasts almost two months in intermittent operation, so even the safe is an option
- The standard cushion holds a Black Bay on its steel bracelet securely, but a clamping bracket like the one from WOLF would be the more robust solution for very heavy cases
WOLF Heritage Single Winder
- The patented lock-in holder clicks into the drum and, according to the manufacturer, carries cases up to 52 millimetres, so a Black Bay on its massive steel bracelet sits rock solid
- The direction of rotation is selectable between clockwise, anticlockwise and bidirectional; for the bidirectional Tudor in-house movements you simply set the alternating mode
- Operation via the supplied universal adapter or AA batteries, plus a storage compartment for a spare strap or second watch and a glass cover against dust
- The speed is fixed at 900 turns per direction and so lies above the 650 documented for Tudor; not critical thanks to the slip clutch, but not finely adjustable
Beco Technic Boxy Carbon Single 1 Classic
- The interval motor with belt drive does without a rattling gear train and, according to specialist retailers, offers three fixed programmes and all three directions of rotation
- Ready to use straight away as a complete device and at the same time the starting point of a system: if a Pelagos joins the Black Bay later, you simply stack another Boxy module
- The plastic case with acrylic glass dome stays under one kilogram, which makes it easier to move and to carry into the cabinet
- Beco Technic does not give the exact turns per programme in figures; anyone who wants to set the 650 value exactly is better off with the Barrington
MODALO Ambiente MV4 for 1 watch
- Black Makassar with piano lacquer looks darker and calmer than walnut and suits a Black Bay in black or burgundy particularly well
- Three directions of rotation cover the bidirectional mode that the Tudor in-house movements with their bidirectional rotor need
- The MV4 motor stops in the 12 o'clock position during the rest phase, so the watch always sits neatly aligned on the shelf
- A single unit does not grow with you: if you expect to be winding a second automatic watch soon, it is better to plan for the two-watch version straight away
ROTHWELL double watch winder
- Five speed settings and three directions of rotation can be set separately for each position, so a Black Bay can run next to an older Tudor chronograph with its own values
- Two positions cover the most common collection, namely one watch for everyday wear and one for special occasions
- The wooden frame with PU leather cover and the red interior give an appearance that goes beyond the plain plastic class
- There is no battery compartment; the device needs a permanent power socket and is therefore ruled out for a closed safe
SONGMICS watch winder for 1 watch
- An adjustable watch cushion with velvet padding takes a Black Bay 41 as well as smaller cases, without permanently overstretching the strap
- Four rotation modes with clockwise, anticlockwise and combined rotation can be adapted to the respective movement; the combined mode is the right one for Tudor
- Switchable LED light, lockable glass front and a modern USB-C connection add up to a surprisingly complete feature set for the price class
- SONGMICS does not document how many turns per day each mode delivers, so we rely here solely on the information about the modes
Turns per day for Tudor calibres
Tudor does not publish official turns values for watch winders, just like its Geneva sister brand. Two sources are therefore reliable: the setting databases of the winder manufacturers and the documented technical characteristics of the movements, above all the winding direction of the rotor. Only the Pelagos calibre MT5612 appears by name in the database; there is no separate entry for the other in-house movements. We state this openly in the table instead of inventing figures.
| Calibre | Typical models | Recommended turns per day | Rotation direction |
|---|---|---|---|
| Tudor MT5612 | Pelagos, Black Bay with date | 650 | bidirectional (bidirectional rotor) |
| Tudor MT5602 and MT5602-U | Black Bay 41 without date | no own entry: 650 to 800 | bidirectional (bidirectional rotor) |
| Tudor MT5652 | Black Bay GMT | no own entry: 650 to 800 | bidirectional (bidirectional rotor) |
| Tudor MT5813 (based on Breitling B01) | Black Bay Chrono | no separate entry: 800 as for the B01 | bidirectional (bidirectional rotor) |
| ETA 2824-2 and ETA 2834 | older Black Bay and Heritage models | 650 | bidirectional |
| ETA 2892-A2 with additional module | older Tudor models with additional display | 650 | bidirectional |
| ETA 7753 and 7754 (7750 design) | older Tudor chronographs | 800 | clockwise only |
| All other Tudor automatic movements | Models without a documented entry | 650 to 800 (rule of thumb) | bidirectional |
The most important point for you: all current Tudor in-house calibres work with a bidirectional rotor, run at 28,800 half-oscillations per hour and offer around 70 hours of power reserve. Bidirectional mode is therefore right in every case, and the number of turns can lie in the range of 650 to 800. Where a database value is missing, this proven standard is the safe choice; with it, practically every modern automatic movement stays fully wound.
One peculiarity deserves a mention because it links two brands. The MT5813 chronograph movement of the Black Bay Chrono goes back to the Breitling B01, while Breitling in turn uses the Tudor MT5612 as its calibre B20. Both houses have simply swapped their movements, which in practice means: the settings are very similar, and the winder recommendations on our page Watch Winders for Breitling can largely be transferred. All values for ETA, Sellita, Seiko, Miyota and other manufacturers are in the complete table of turns per day.
What matters in a watch winder for Tudor
After the direction of rotation, the holder is the decisive buying point, and well ahead of any electronics. Tudor builds robust tool watches with diameters of 39 to 42 millimetres, and on the massive steel bracelet quite some weight adds up. This weight acts as a lever on the mount with every rotation, and a loose cushion can slip or tip under it. Systems with a tensioning cuff such as the WOLF Heritage clamp the case actively and solve the problem by design.
The lighter models are more relaxed. A Pelagos in a titanium case weighs noticeably less than a Black Bay in steel, and a Black Bay on a leather or textile strap weighs less again than the same watch on the steel bracelet. For these combinations, a well-adjustable cushion such as those that come with Barrington, MODALO, SONGMICS and Beco Technic is perfectly sufficient. If in doubt, check the manufacturer's specification for the maximum case diameter and whether your strap fits over the holder.
The third point is location. A unit in the bedroom should run quietly, and we have a separate overview on this: quiet watch winders. If the winder is going into the safe, you need battery operation, because a cable lead-through drilled in afterwards voids the safe's certification; more on this in the comparison Watch safe with watch winder. And because Tudor movements last around 70 hours, a unit is purely a convenience if you wear the watch daily, which the article Power reserve explained puts into more detail.
Which unit for whom
If you want to set up your Tudor as precisely as possible, the Barrington Single is the first choice, because its 650 setting is the only documented database value for a Tudor calibre that hits the mark exactly. If, on the other hand, you mostly wear a Black Bay on the steel bracelet and want maximum security in the holder, the WOLF Heritage with its snap-in cuff is the better answer. And anyone looking simply for the most well-rounded unit and wanting to expand later should go for the Beco Technic Boxy. The full overview of all designs is given by our watch winder buying guide, and you will find further single units under watch winders for 1 watch.
If your watch sits on an open shelf and the furniture should not be disturbed, the MODALO Ambiente MV4 in solid Makassar wood is the most beautiful solution in this selection. If a second Tudor joins it, for example a Black Bay and a Pelagos in rotation, the ROTHWELL Doppel with separately adjustable positions is the logical step; more models in this class are shown in the comparison Watch winders for 2 to 4 watches. Anyone who wants to start small first and lock the watch away at the same time is in the right place with the SONGMICS.
If you are interested in a particular provider, you will find the ranges gathered in the brand overview, for example at Barrington, WOLF or MODALO. The full data sheets are in our overview of data checks. If you wear other brands besides the Tudor, the sister pages watch winders for Rolex, for Omega and for Seiko will help.
Editorial verdict
With Tudor the technology is refreshingly clear: a bidirectional rotor, so bidirectional mode, plus 650 to 800 turns per day and around 70 hours of power reserve as a comfortable buffer. The real decision is therefore made on the holder and the number of positions. The Barrington Single is our recommendation for the most precise setting, the WOLF Heritage for heavy cases, the Beco Technic Boxy as the top-rated all-rounder, the MODALO Ambiente MV4 for the open shelf, the ROTHWELL Doppel for two watches and the SONGMICS for a low-cost entry.
You need not fear too many turns here, because the slip clutch in the barrel prevents the mainspring from being overwound. A setting that is slightly too high costs only electricity and nothing else, which is why the WOLF's 900 turns are harmless for a Tudor. Whether a unit is worth it for you at all is answered in a few minutes by our basics article Does my watch need a watch winder?. And for clarity: none of the units presented here is recommended, licensed or certified by Tudor; we assess only the technical suitability.
Buying guides for other watch brands
The in-house movements of the MT series share technology with a prominent neighbour, which makes the comparison worthwhile: Breitling, Rolex, Omega, IWC, Panerai, TAG Heuer, Longines, Oris, Seiko, Cartier, Jaeger-LeCoultre, Zenith, Hamilton, Tissot, Certina, Mido, Grand Seiko, Bell und Ross, Sinn, Glashütte Original, Nomos, Rado, Maurice Lacroix, Frederique Constant, Junghans. Our table of turns per day collects all documented values per calibre.
For the Black Bay and Pelagos with their sturdy cases, holders from WOLF and Barrington are the obvious choice. The brand overview gives an overview of all manufacturers.
The text of this page was created with an AI language model and was reviewed and approved editorially before publication. Editorial responsibility lies with Seydhan Cakmak. The product images shown are not AI images but manufacturer and retailer photos from the Amazon catalogue, which we embed unchanged.
A limitation we disclose: Amazon and the retailers selling there now use generative tools in their listings themselves. Whether an individual catalogue image is affected, we cannot check from the outside, so we claim it neither one way nor the other. As soon as an image demonstrably comes from a generative model, we label it visibly on the image with the label AI image. More on this on the AI transparency page.